Call 08048972695 30% Response Rate

Send Email

Accurate Proportioner

Accurate, automatic mixing of cnc coolants / forging die lubricants / casting die lubricants with water in required proportion.
Accurate Proportioner
  • Accurate Proportioner
  • Accurate Proportioner
  • Accurate Proportioner

Accurate Proportioner

Get Latest Price

Product Details:
Minimum Order Quantity1 Number
MaterialHDPE + AFLAC
Connection Type3/4 BSP inlet and outlet
I Deal InNew Only
Installation Services RequiredYes

CNC coolants / forging die lubricants / die casting lubricants must be thoroughly mixed with water in correct ratios. If not mixed correctly, following problems are encountered:

High consumption of coolant / lubricant

Low sump life due

Bad smell from sump

Reduced tool life due to improper emulsification


Along with use of a good coolant / lubricant, it is essential to mix these in correct ratios in water.

Accurate Proportioner is used for effective mix of coolants/ lubricants or any such concentrate with water in pre-determined ratio.

The desired proportion or percentage must be set on the Accurate Proportioner. Only water inlet with 4 to 7 bar pressure is required to run the Accurate Proportioner. As water is inlet into the equipment, its pistons move and create a suction vaccuum. This vaccuum withdraws the coolant / lubricant concentrate directly from the drum through suction pipe. The coolant concentrate is then mixed thoroughly or emulsified with water in the equipment. The correctly mixed solution of coolant and water is delivered through the outlet pipe.

Once the correctly mixed solution is created using Accurate Proportioner, there are many options to dispense these in the sump of CNC. These are:

. CNC coolant mixed with water is delivered directly into many CNC sumps manually, using a long pipe attached to the outlet of Accurate Proportioner

. CNC coolant mixed with water is delivered into a mother sump, which is then connected to multiple sumps

. If direct water connection is provided into each sump, the Accurate Proportioner can be used to deliver CNC coolant mixed with water into this connection. A float valve and solenoid valve can be used to automatically deliver the mixed solution into each sump as soon as the coolant level is reduced.

Hence, Accurate Proportioner and accessories can be used to completely automate mixing of coolant with water and delivery of the mixed solution into each sump.

Benefits proven by the use of Accurate Proportioner are:

. Reduced coolant consumption as spillage losses are eliminated

. Reduced coolant consumption due to correct emulsification of coolant with water

. Increased tool life due to correct mix of coolant with water

. Increased sump life due to correct mix of coolant with water

. Substantial reduction in fouling of coolant and preventing bad smell


Additional Information:

  • Production Capacity: 350 litres of concentrate per hour
  • Delivery Time: 2 weeks from receiving PO
  • Packaging Details: Equipment is packed in sturdy, transportworthy carton box. If required, wooden box packing can be offered.
Get Best QuoteRequest A Callback


Contact Us
Thank youYour Enquiry has been sent successfully.
© Steel Plant Specialties LLP. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.